Hardware compliance,
done for you. Not another tool to learn.
RoboCred is an AI-native compliance service for hardware and robotics companies. Send us your CAD, KiCad, and BOM files. We run the gap analysis against CE, FCC, UL, IEC, ISO, and IS standards, recommend the design fixes, and deliver a submission-ready compliance package. Scoped pricing. Weeks instead of months.
You send files. We deliver compliance.
RoboCred is a service, not a tool. Your engineers don't learn anything new — they keep designing while we handle compliance.
Upload your CAD (STEP, SolidWorks, Onshape), electrical schematics (KiCad, Altium), firmware, and BOMs through our secure portal. We accept every major hardware design format directly — no conversion, no rework on your end.
Our platform extracts components, wiring topology, safety logic, materials, mechanical clearances, and system interfaces into a unified compliance graph — a single source-agnostic representation of your entire system. Fully mapped today: IEC 60204-1 and ISO 12100. In active mapping: ISO 26262, IS 302, ISO 13849, UL 1740, FCC Part 15, and more. New standards added every time a customer pulls us into a new jurisdiction.
The compliance graph is checked against machine-encoded standards (CE, FCC, UL, IEC 60204-1, ISO 12100, ISO 13849, IS 302, and more). Every clause matched to specific design evidence. Every violation traced back to the exact part, net, or BOM line that triggered it.
You receive a complete submission-ready compliance package: gap report, design fix recommendations, patched CAD/KiCad files where applicable, and the technical file structured for whichever certification body you're submitting to. Reviewed and signed off by our engineers. Ready to file.
“Customers don't learn a new tool. We just do the work.”
Compliance is the most expensive bottleneck in hardware.
Hardware companies routinely lose 6–18 months and $100K+ per certification to manual compliance work. The bottleneck isn't engineering. It's regulatory friction.
- 6–18 month certification cycles for a single market
- $80K–$200K per certification in consultant fees
- Manual checklists in spreadsheets, reviewed once at project end
- Engineers cross-referencing standards by hand against design files
- Violations discovered after parts are manufactured
- No traceability between design decisions and standard clauses
- Static PDF reports sent to auditors with no live evidence
- Every new market = restart the entire process
- Weeks instead of months from file submission to package delivery
- Transparent pricing scoped to your project — no hourly bills
- AI-driven clause-by-clause gap analysis on every file
- Design fix recommendations linked to the exact failing clause
- Violations flagged before any parts are ordered
- Full traceability — every requirement linked to design evidence
- Live, interactive audit packages our engineers stand behind
- Standard library compounds across customers — each engagement faster than the last
Every layer of your hardware, verified.
RoboCred covers the mechanical and electrical layers of your hardware today, with embedded and firmware compliance available on demand through our in-house compliance engine — so every layer of a real hardware system is accounted for.
- Guard clearance and reach-zone verification
- Material property and standards compliance
- Assembly joint and fastener safety review
- Emergency-stop accessibility check
- Enclosure IP rating verification
- Emergency-stop circuit topology validation
- Grounding and bonding verification
- Overcurrent and GFCI protection checks
- Voltage creepage and clearance analysis
- Safety interlock wiring review
- Safety-function code-path tracing
- Watchdog and fault-state handling review
- Control-loop timing verification
- Software PL/SIL requirement mapping
- Scoped per engagement through our compliance engine
Two ways to see what we do.
How our AI reads your design files.
See the recommendation cards, the severity grades, the clause-by-clause traceability — and how the engine turns engineering files into a compliance package.
Free compliance discovery in 60 seconds.
Drop a STEP, KiCad, or BOM file and get back the exact standards you need to certify against — plus a certification roadmap. No call, no consultant, no commitment.
Advanced safety analysis, powered by Saphira AI.
When a product needs more than regulatory compliance, we deliver advanced safety and risk analysis on Saphira AI's platform (YC S24), as part of the same managed engagement. We run HARA, TARA, and FMEA through Saphira's engine, so you get certification and functional safety from one partner — with no new tool for your team to learn.
Hazard Analysis and Risk Assessment, automated against ISO 26262 and adjacent automotive functional-safety frameworks.
Threat Analysis and Risk Assessment, aligned with ISO/SAE 21434 for cybersecurity in road vehicles and connected hardware.
Failure Mode and Effects Analysis, generated directly from your BOM and schematic graph with severity, occurrence, and detection scoring.
Scoped to your product. Outcome-based. Quoted per engagement.
RoboCred doesn't charge by the hour and we don't have a rate card. Every engagement is a compliance package scoped and priced to your hardware, your target markets, and what you need to ship under. We come back with one number, one delivery date, and the exact deliverables you'll receive.
Single-Market Certification
A complete submission-ready compliance package for one regulatory region. Gap analysis, design fix recommendations, technical file, and standards documentation — scoped to ship into the EU, US, India, or another single market.
Multi-Market Compliance Retainer
Continuous gap analysis across multiple standards as your product evolves and enters new regions. Every design change re-evaluated. New standards added as you expand. Engineering review with a named lead.
Custom OEM Engagement
Scoped for Tier-1 suppliers, robotics OEMs, and hardware companies with multi-domain compliance needs — including HARA / TARA / FMEA delivered on the Saphira AI platform, post-market surveillance, and supplier-side compliance flow-down.
Backed and recognized by people who fund hardware.
Ship hardware. We'll handle compliance.
Hardware companies preparing for certification — into the EU, US, India, or anywhere else — we'd like to talk. Tell us what you're shipping and which markets you need to hit. We'll come back with a scoped compliance package.